Team 3 Webpage Team News and Announcements
Back to Team3 Homepage
CSC402/ECE470 Class Homepage
Member Pages Team Homeworks Team Heartbeats Team Presentations Project Highlights Team Pod Inventory Team Schedule for the Project

 

Heartbeat #8

From: Team #3 (Dalat, Chris, Shadi, Fritz, and Tyler)
Heartbeat Msg: #8

To: ECE470/CSC402 Instructors
To email: net_heartbeat@renoir.csc.ncsu.edu

Subject: Heartbeat #8 From Team 3

Date: 10/25/02


1. Task Status:

- Homework 4 group demo is completed.
- Waiting for Dr. Vouk to test our firewall.
- Done with homework 5.
- SNMP log file from monet is available [HERE]
- Revised and updated schedule.
- Had a meeting with Kumar on Thursday [Meeting Summary].
- Done with reading the RFC's and equipment specs.

Below is the schedule file:
[Schedule]

2. Personnel Status:
Dalat Bui - Lead
Chris Brezovec - Vice Lead
K. Fritz Lehr - Webmaster
Shadi Eskama - Member
Tyler Humprey - Member


3. Risk Status:

Below is the risk table:

Rank Now
Rank History
Loss-Causing Event
Likelihood of the Loss-Causing Event Occuring
Estimated Severity
(or Loss)
Current Risk
1
4,5
Readings, homeworks, tests, and many other task we have to do for csc402/ece470 class require a huge amount of time. (And our other classes also require much time). This leaves us little time to do the project and may put us behind schedule.
0.5
0.8
0.06
2
1
Firewall and portsentry are setup on Braun. If this is not done properly, our pod may be at risk.
0.4
0.6
0.05
3
-

Test #4 are coming this Tuesday. Many of us have been busy with hw5 and projects and are not quite ready for it. This may result in bad grades.

0.3
0.3
0.03
4
3
Some ACs such as Redback SMS 10000, Cisco 10000 and net.com SCREAM are still in the ordering process. They may not be available by October 30, when we plan to physically learn how to configure them.
0.4
0.2
0.20


4. Problem List:

- DNS was not properly pointed to on the gateway. This caused the firewall not to be certified, while Dr. Vouk was there.
- Netsaint was not running properly because the configuration files were not modified correctly. It is working now.
- For some reason, Braun cannot boot to GUI screen anymore :(


5. Any other issues you wish to report, raise, address, ...
None at this time.

End-of-Msg

 

 



This page was last updated on:
Friday, October 25, 2002 22:22
Copyright © 2002 by Team 3, All Rights Reserved.

WebSite contact: K. Fritz Lehr, E-mail: kflehr@unity.ncsu.edu, Tel: (919) 593-0162